Honda TRX400EX FOURTRAX 1999 Service Manual page 83

Disconnect the starter motor cable by removing the
terminal nut.
Disconnect the crankcase breather tube from the
engine.
Release the brake lock cable from the cable guide by
removing the mounting bolt.
Loosen the clutch cable lock nut. Remove the holder
bolts and cable holder and disconnect the clutch
cable from the clutch arm.
Disconnect the oil pipes from the engine by remov-
ing the bolts. Remove the dowel pins and O-rings.
Remove the brake pedal (page 14-20).
Remove the two bolts and engine guard.
Support the engine w i t h a floor jack or other
adjustable support.
NOTE:
The jack height must be continually adjusted to
relieve stress for ease of bolt removal.
Remove the upper engine hanger nut, spacers and
bolt.
Remove the front engine hanger nut, cable guide,
spacer and bolt.
Remove the front engine hanger bolts, pipe clamp
and hanger plates.
Remove the lower engine hanger nut, spacers and
bolt.
ENGINE REMOVAL/INSTALLATION
6-3