CYLINDER HEADlVALVE
Install the valve adjusting hole caps.
Install the cylinder head cover onto the cylinder head.
Install the 8 mm and 6 rnrn cylinder head cover bolts
and tighten them in a crisscross pattern i n 2 or 3
steps.
TORQUE: 8 mm bolt: 23
Install the spacers, upper engine hanger bolt and nut,
and tighten the nut.
TORQUE: 54 Nm (5.5 k g f m
Connect the crankcase breather tube to the cylinder
head cover.
Install the spark plug cap.
Check the valve clearances and adjust
(page
7-24
if
necessary