Coat the shift fork shaft with oil.
Install the shift fork shaft through the shift forks and
into the left crankcase.
Apply oil to the gearshift spindle oil seal lip
Install the gearshift spindle by aligning the return
spring ends with the spring pin bolt while pulling the
gearshift plate.
Engage the gearshift plate with the shift drum.
Assemble the crankcase halves (page 11-14),
REMOVAL
Separate the crankcase (page 11-31,
Remove the transmission (page 11-4)
Remove the crankshaft and balancer from the left
crankcase using a hydraulic press while holding
them.
CAUTION
Be careful not t o damage the crankcase mating sur-
face and crankshaft
assembly.
FORK
I
11-9