Honda TRX400EX FOURTRAX 1999 Service Manual page 154

If the left crankshaft bearing is left on the crankshaft,
remove it using the bearing puller with a suitable
protector.
TOOL
Universal bearing puller
NOTE:
Always replace the left crankshaft bearing with a new
one when the crankshaft is removed.
INSPECTION
CRANKSHAFT
Set the crankshaft as shown and measure the runout
using a dial indicator.
SERVICE LIMIT 0.12 mm 10.005
Measure the side clearance between the connecting
rod big end and crank weight with a feeler gauge.
SERVICE LIMIT 0.6 mm 10.02 in)
Measure the radial clearance at the connecting rod
big end in an
SERVICE LIMIT: 0.05 mm (0.002 in)
11-10
-
07631 0010000 or
equivalent commercially
available in U.S.A.
X Y
and directions.
I
P
6
PROTECTOR
I