Epson WF-C869R User Manual page 61

User's Guide
1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3. Place the original face-down and slide it to the corner mark.
Note:
❏ A range of 1.5 mm from the top edge or left edge of the scanner glass is not scanned.
❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
4. Close the cover gently.
The size of the originals is automatically detected. If the size is not detected, place the originals again.
Important:
c
Do not apply too much force to the scanner glass or the document cover. Otherwise, they may be damaged.
Note:
Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Placing Originals
61