Epson WF-C869R User Manual page 132

User's Guide
Sending Faxes Using the Control Panel
You can enter fax numbers for recipients and send faxes by using the control panel. The printer automatically dials
the recipients and sends the fax.
Note:
❏ When sending a fax in monochrome, you can preview the scanned image on the LCD screen before sending.
❏ You can reserve up to 50 monochrome fax jobs even while the phone line is in use for a voice call, sending another fax, or
receiving a fax. You can check or cancel reserved fax jobs from
❏ If the fax number is busy or there is some problem, the printer automatically redials after one minute.
1. Place the originals.
Note:
You can send up to 100 pages in one transmission; however depending on the remaining amount of memory, you may
not be able to send faxes even with less than 100 pages.
2. Tap Fax on the home screen.
3. Specify the recipient.
You can send the same monochrome fax to up to 200 recipients. However, a color fax can only be sent to one
recipient at a time.
❏ To enter manually: Enter numbers using the numerical keypad on the LCD screen, and then tap OK.
- To add a pause (pause for three seconds during dialing), enter a hyphen(-).
- If you have set an external access code in Line Type, enter "#" (hash) instead of the actual external access
code at the beginning of the fax number.
❏ To select from the contacts list: Tap Contacts, tap the check box to add a check mark to a contact, and then
tap Proceed.
❏ To select from the sent fax history: Tap Recent, and then select a recipient.
Note:
❏ When Direct Dialing Restrictions in Security Settings is enabled, you can only select fax recipients from the
contacts list or the sent fax history. You cannot manually enter a fax number.
❏ To delete recipients you entered, display the list of recipients by tapping on the field of a fax number or the number of
recipients on the LCD screen, select the recipient from the list, and then select Remove.
4. Tap the Fax Settings tab, and then make settings such as the resolution and the sending method as necessary.
When you set Color Mode to Color, proceed to step 6.
Note:
❏ To send 2-sided originals, enable ADF 2-Sided. However, you cannot send in color with this setting.
❏ Tap
(Presets) on the fax top screen to save the current settings and the recipients in Presets. Recipients may not
be saved depending on how you specified the recipients, such as entering a fax number manually.
5. When sending a fax in monochrome, tap
To send the fax as is, tap Start Sending, and then go to step 7. Otherwise, cancel the preview by tapping
Cancel.
❏
: Moves the screen in the direction of the arrows.
❏
: Reduces or enlarges.
Faxing
.
on the fax top screen to confirm the scanned document.
132