Danfoss ECL Comfort 210 Operating Manual page 79

Operating Guide ECL Comfort 210/296/310, application A232 / A332
Example, minimum return temperature limitation;
return temperature gets lower than limit
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
MENU > Settings > Return limit
Circuit, sensor (functionality of return / surface
temperature sensor)
Setting the functionality for the return / surface temperature sensor.
See Appendix "Parameter ID overview"
OFF:
Sensor in question is not used as return / surface
temp. sensor
ON: Sensor in question is used as return / surface temp.
sensor
Select the desired functionality.
VI.JM.G2.02
= Temperature
T
= Temperature
Y
= Time
X
# 1 # = Return temperature
# 2 # = Return temperature limit
# 3 # = Desired flow temperature
# 4 # = Action point
1x003
© Danfoss | 2017.08 | 79