Danfoss ECL Comfort 210 Operating Manual page 12

Operating Guide ECL Comfort 210/296/310, application A232 / A332
A232, in general
The function selector:
Each circuit has a function selector. The heating circuit can run,
for example
• Comfort periods at a desired room temperature of 21 °C
• Saving periods at a desired room temperature of 16 °C or Total
stop
The cooling circuit can run, for example
• Comfort periods at a desired room temperature of 24 °C
• Saving periods at a desired room temperature of 30 °C
Schedules:
The A232 application contains 3 week schedules; one for the
heating circuit and one for the cooling circuit. The third schedule is
for universal use and is found in 'Common controller settings' .
A232.1: Relay 4 (X4) can be set to follow the third schedule.
A332.1, A332.2, A332.3 and A332.4: Relay 5 (X5) can be set to follow
the third schedule.
Override functions:
By means of switches, connected to different inputs, the following
functionalities are available when the input in question is activated:
S7
A232.1 Stop the circulation pump
A332.1
Stop the circulation pump
A332.2
Stop the circulation pump
A332.3 No function
A332.4 Override to Heating
12 | © Danfoss | 2017.08
S8
Override to Comfort or Saving mode
Override to Comfort or Saving mode
Override to Comfort or Saving mode
No function
Override to Comfort or Saving mode
S9
No function
No function
No function
No function
Override to Cooling
VI.JM.G2.02