GE 350 Communications Manual page 82

SIMPLIFIED SR3 IEC61850 GOOSE MESSAGING
4–12
Again each reception device column has 32 entries corresponding to the 32 remote
inputs of this device into which the associated status information is mapped.
At the bottom of the screen there is a selection to determine if quality bits are to be
included with the value. Users have an option to Enable/Disable Quality here. In our
example application we are going to send just the status of Virtual Input 1 from the
relay labeled 228 to the relay labeled 230, so the Value Only selection will be made by
clicking on that portion of the screen.
Also located at the bottom of the screen are the icons the restore Restore and Default:
– Restore if selected will restore the screen to the last save position
– Default if selected will set all the screen information to default values.
CHAPTER 4: SR3 IEC61850 GOOSE
350 FEEDER PROTECTION SYSTEM – COMMUNICATIONS GUIDE