Goose Rx Headers - GE 350 Communications Manual

CHAPTER 4: SR3 IEC61850 GOOSE

GOOSE Rx headers

350 FEEDER PROTECTION SYSTEM – COMMUNICATIONS GUIDE
Figure 4-3: EnerVista SR3 GOOSE Status page
The 350 firmware supports GOOSE messages that contain up to one level of nesting, and
that are capable of mapping only digital values to the remote inputs.
The 350 firmware maintains the format of GOOSE messages that can be received in
MODBUS registers.
Configuration of GOOSE messages to be received by the device, is implemented using the
EnerVista SR3 Setup software, as shown below, either by reading in and parsing the ICD, or
SCD file from a remote device, or by manually configuring the settings.
SR3 IEC 61850 GOOSE DETAILS
4–43