Outdoor Unit
2.2
Removal of the Fan Motor / Propeller Fan
Procedure
Step
Remove the top panel
and the front panel.
1. Remove the electrical box
cover.
Loosen the screw on
1
the back of the shelter.
2
Undo the two claws and
remove it.
Release the four claws
3
of the
electrical box
cover
and remove it.
174
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Claws
Shelter
(R2688)
Si04-306E
Points
This procedure is not
necessary to remove the
propeller fan only.
The claws have been
released since the front
panel was removed.
Removal Procedure