European Call Waiting; European Call Transfer; Usa Type Supplementary Services - ZyXEL Communications VMG8924-B10D User Manual

European Call Waiting

This allows you to place a call on hold while you answer another incoming call on the same telephone
(directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone. Take one of the
following actions.
• Reject the second call.
Press the flash key and then press "0".
• Disconnect the first call and answer the second call.
Either press the flash key and press "1", or just hang up the phone and then answer the phone after it
rings.
• Put the first call on hold and answer the second call.
Press the flash key and then "2".

European Call Transfer

Do the following to transfer an incoming call (that you have answered) to another phone.
Press the flash key to put the caller on hold.
1
When you hear the dial tone, dial "*98#" followed by the number to which you want to transfer the call.
2
After you hear the ring signal or the second party answers it, hang up the phone.
3
European Three-Way Conference
Use the following steps to make three-way conference calls.
When you are on the phone talking to someone, press the flash key to put the caller on hold and get a
1
dial tone.
Dial a phone number directly to make another call.
2
When the second call is answered, press the flash key and press "3" to create a three-way conversation.
3
Hang up the phone to drop the connection.
4
If you want to separate the activated three-way conference into two individual connections (one is on-
5
line, the other is on hold), press the flash key and press "2".

22.10.2.3 USA Type Supplementary Services

This section describes how to use supplementary phone services with the USA Type Call Service Mode.
Commands for supplementary services are listed in the table below.
Chapter 22 Voice
VMG8924-B10D/B30D User's Guide
242