ZyXEL Communications VMG8924-B10D User Manual page 21

Dual band wireless ac/n vdsl2 voip combo wan gigabit lad
Hide thumbs Also See for VMG8924-B10D:
Table of Contents

Advertisement

None of the LEDs are on if the VMG is not receiving power.
Table 2 LED Descriptions
LED
COLOR
Power
Green
Red
DSL
Green
Orange
Internet
Green
Red
WAN
Green
LAN1~4
Green
WLAN/WPS
Green
Orange
Chapter 1 Introducing the VMG
STATUS
DESCRIPTION
On
The VMG is receiving power and ready for use.
Blinking
The VMG is self-testing.
On
The VMG detected an error while self-testing, or there is a device
malfunction.
Blinking
The VMG is upgrading firmware.
Off
The VMG is not receiving power.
On
The VDSL line is up.
Slow
The VMG is detecting carrier signals.
Blinking
Fast
The VMG is initializing the VDSL line.
Blinking
On
The ADSL line is up.
Slow
The VMG is detecting carrier signals.
Blinking
Fast
The VMG is initializing the ADSL line.
Blinking
Off
The DSL line is down.
On
The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking
The VMG is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
On
The VMG attempted to make an IP connection but failed. Possible causes
are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
On
The VMG has a successful 10/100/1000 Mbps Ethernet connection on the
WAN.
Blinking
The VMG is sending or receiving data to/from the WAN at 10/100/1000
Mbps.
Off
There is no Ethernet connection on the WAN.
On
The VMG has a successful 10/100/1000 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking
The VMG is sending or receiving data to/from the LAN at 10/100/1000
Mbps.
Off
The VMG does not have an Ethernet connection with the LAN.
On
The 2.4 GHz or 5 GHz wireless network is activated.
Blinking
The VMG is communicating with 2.4 GHz or 5 GHz wireless clients.
Blinking
The VMG is setting up a WPS connection with a 2.4 GHz or 5 GHz wireless
client.
Off
The 2.4 GHz or 5 GHz wireless network is not activated.
VMG8924-B10D/B30D User's Guide
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmg8924-b30d

Table of Contents