ZyXEL Communications VMG8924-B10D User Manual page 221

Table 100 VoIP > SIP > SIP Account > Add new account/Edit (continued)
LABEL DESCRIPTION
Enable G.168 Select this if you want to eliminate the echo caused by the sound of your voice
(Echo reverberating in the telephone receiver while you talk.
Cancellation)
Enable VAD Select this if the VMG should stop transmitting when you are not speaking. This
(Voice Active reduces the bandwidth the VMG uses.
Detector)
Call Features
Send Caller ID Select this if you want to send identification when you make VoIP phone calls. Clear
this if you do not want to send identification.
Enable Call Select this to enable call transfer on the VMG. This allows you to transfer an incoming
Transfer call (that you have answered) to another phone.
Enable Call Select this to enable call waiting on the VMG. This allows you to place a call on hold
Waiting while you answer another incoming call on the same telephone number.
Call Waiting Specify a time of seconds that the VMG waits before rejecting the second call if you
Reject Timer do not answer it.
Enable Select this if you want the VMG to forward all incoming calls to the specified phone
Unconditional number.
Forward
Specify the phone number in the To Number field on the right.
Enable Busy Select this if you want the VMG to forward incoming calls to the specified phone
Forward number if the phone port is busy.
Specify the phone number in the To Number field on the right.
If you have call waiting, the incoming call is forwarded to the specified phone
number if you reject or ignore the second incoming call.
Enable No Answer Select this if you want the VMG to forward incoming calls to the specified phone
Forward number if the call is unanswered. (See No Answer Time.)
Specify the phone number in the To Number field on the right.
No Answer Time This field is used by the Active No Answer Forward feature.
Enter the number of seconds the VMG should wait for you to answer an incoming
call before it considers the call is unanswered.
Enable Do Not Select this to set your phone to not ring when someone calls you.
Disturb
Active Incoming Select this if you do not want the phone to ring when someone tries to call you with
Anonymous Call caller ID deactivated.
Block
Enable MWI Select this if you want to hear a waiting (beeping) dial tone on your phone when
you have at least one voice message. Your VoIP service provider must support this
feature.
MWI Subscribe Keep the default value for this field, unless your VoIP service provider tells you to
Expiration Time change it. Enter the number of seconds the SIP server should provide the message
waiting service each time the VMG subscribes to the service. Before this time passes,
the VMG automatically subscribes again.
Hot Line / Warm Select this to enable the hot line or warm line feature on the VMG.
Line Number
Warm Line Select this to have the VMG dial the specified warm line number after you pick up
the telephone and do not press any keys on the keypad for a period of time.
Hot Line Select this to have the VMG dial the specified hot line number immediately when
you pick up the telephone.
Hot Line / Warm Enter the number of the hot line or warm line that you want the VMG to dial.
Line number
Chapter 22 Voice
VMG8924-B10D/B30D User's Guide
221