ZyXEL Communications VMG8924-B10D User Manual page 187

Figure 98 Interface Group Configuration
The following table describes the fields in this screen.
Table 75 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interfaces Select the WAN interface this group uses. The group can have up to one PTM interface, up to
used in the one ATM interface, up to one ETH interface, and and up to one WWAN interface.
grouping
Select None to not add a WAN interface to this group.
Selected LAN Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the Available LAN
Interfaces Interfaces list and use the left arrow to move them to the Selected LAN Interfaces list to add the
interfaces to this group.
Available LAN
Interfaces To remove a LAN or wireless LAN interface from the Selected LAN Interfaces, use the right-facing
arrow.
Automatically Click Add to identify LAN hosts to add to the interface group by criteria such as the type of the
Add Clients With hardware or firmware. See
the following
DHCP Vendor
IDs
Chapter 15 Interface Grouping
Section 15.2.2 on page 188
VMG8924-B10D/B30D User's Guide
187
for more information.