Load Signed Certificate - ZyXEL Communications VMG8924-B10D User Manual

The following table describes the labels in this screen.
Table 94 Create Certificate Request
LABEL
Certificate
Name
Common Name
Organization
Name
State/Province
Name
Country/Region
Name
Apply
Cancel
After you click Apply, the following screen displays to notify you that you need to get the certificate
request signed by a Certificate Authority. If you already have, click Load_Signed to import the signed
certificate into the VMG. Otherwise click Back to return to the Local Certificates screen.
Figure 121 Certificate Request Created

21.3.2 Load Signed Certificate

After you create a certificate request and have it signed by a Certificate Authority, in the Local
Certificates screen click the certificate request's Load Signed icon to import the signed certificate into
the VMG.
Chapter 21 Certificates
DESCRIPTION
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Select Auto to have the VMG configure this field automatically. Or select Customize to enter it
manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in the field
provided. The domain name or e-mail address can be up to 63 ASCII characters. The domain
name or e-mail address is for identification purposes only and can be any string.
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the VMG drops trailing spaces.
Type up to 32 characters to identify the state or province where the certificate owner is located.
You may use any character, including spaces, but the VMG drops trailing spaces.
Select a country to identify the nation where the certificate owner is located.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG8924-B10D/B30D User's Guide
212