ZyXEL Communications VMG8924-B10D User Manual page 102

Use this screen to view your VMG's MAC filter settings and add new MAC filter rules. Click Network
Setting > Wireless > MAC Authentication. The screen appears as shown.
Figure 35 Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 23 Wireless > MAC Authentication
LABEL DESCRIPTION
General
SSID Select the SSID for which you want to configure MAC filter settings.
MAC Restrict Define the filter action for the list of MAC addresses in the MAC Address table.
Mode
Select Disable to turn off MAC filtering.
Select Deny to block access to the VMG. MAC addresses not listed will be allowed to access the
VMG.
Select Allow to permit access to the VMG. MAC addresses not listed will be denied access to
the VMG.
MAC address List
Add new MAC Click this if you want to add a new MAC address entry to the MAC filter list below.
address
Enter the MAC addresses of the wireless devices that are allowed or denied access to the VMG
in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
# This is the index number of the entry.
MAC Address This is the MAC addresses of the wireless devices that are allowed or denied access to the VMG.
Modify Click the Edit icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to delete the entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Chapter 7 Wireless
VMG8924-B10D/B30D User's Guide
102