The Guest/More Ap Screen - ZyXEL Communications VMG8924-B10D User Manual

Figure 32 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 19 Wireless > General: More Secure: WPA(2)-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
more.../less
Encryption
Group Key
Update Timer

7.3 The Guest/More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the VMG.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
Chapter 7 Wireless
DESCRIPTION
Select More Secure to enable WPA(2)-PSK data encryption.
Select WPA-PSK or WPA2-PSK from the drop-down list box.
Select this option to have the VMG automatically generate a password. The password field will
not be configurable when you select this option.
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only difference
between the two is that WPA(2)-PSK uses a simple common password, instead of user-specific
credentials.
If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters.
Click more... to show more fields in this section. Click less to hide them.
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to
all clients.
VMG8924-B10D/B30D User's Guide
98