ZyXEL Communications VMG8924-B10D User Manual page 46

Before enabling file sharing in the VMG, please set up your shares beforehand in the USB. Also, the
following special characters are not allowed for the USB share name: ", ', `, <, >, ^, $, |, &, ;, \, /, :, *, and
?.
4.5.1.1 Activate File Sharing
Connect your USB device to the USB port at the side panel of the VMG.
Click Network Setting > USB Service > File Sharing. Select Enable and click Apply to activate the file
sharing function. The VMG automatically adds your USB device to the Information.
4.5.1.2 Set up File Sharing on Your VMG
You also need to set up file sharing on your VMG in order to share files.
Click Add New Share in the File Sharing screen to add a new share. Select your USB device from the
1
Volume drop-down list box.
Click Browse to browse through all the files on your USB device. Select the folder that you want to add as
2
a share. In this example, select BobShare. Click Apply
If the share names include the following special characters: ", ', `, <, >, ^, $, |, &, ;, \, /, :, *, and ?, the
following screen will appear. To avoid this, please correct your share names in the USB, and repeat the
steps above.
Chapter 4 Tutorials
VMG8924-B10D/B30D User's Guide
46