Displaying Flow Statistics; Default Fspf Settings - Cisco Nexus 5000 Series Configuration Manual

Default FSPF Settings

Displaying Flow Statistics

Use the show fcflow stats commands to view flow statistics. The following example displays the aggregated
flow summary:
switch# show fcflow stats aggregated
Idx
---------- ---------- ----------
The following example displays the flow statistics:
switch# show fcflow stats
The following example displays flow index usage:
switch# show fcflow stats usage
2 flows configured
Configured flows : 3,7
The following example shows how to display global FSPF information for a specific VSAN:
switch# show fspf vsan 1
The following example shows how to display a summary of the FSPF database for a specified VSAN. If no
additional parameters are specified, all LSRs in the database are displayed:
switch# show fspf database vsan 1
The following example shows how to display FSPF interface information:
switch# show fspf vsan 1 interface fc2/1
Default FSPF Settings
The following table lists the default settings for FSPF features.
Table 28: Default FSPF Settings
Parameters
FSPF
SPF computation
SPF hold time
Backbone region
Acknowledgment interval (RxmtInterval)
Refresh time (LSRefreshTime)
Maximum age (MaxAge)
Hello interval
Dead interval
Distribution tree information
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
160
VSAN frames
6 1 42871
Configuring Fibre Channel Routing Services and Protocols
Default
Enabled on all E ports and TE ports.
Dynamic.
0.
0.
5 seconds.
30 minutes.
60 minutes.
20 seconds.
80 seconds.
Derived from the principal switch (root node).
OL-xxxxx-xx