Resetting Fspf To The Default Configuration; Enabling Or Disabling Fspf - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
Command or Action
Step 5
switch-config-(fspf-config)# region region-id

Resetting FSPF to the Default Configuration

To return the FSPF VSAN global configuration to its factory default, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# no fspf config vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# no fspf config vsan vsan-id

Enabling or Disabling FSPF

To enable or disable FSPF routing protocols, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# fspf enable vsan vsan-id
3. switch(config)# no fspf enable vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# fspf enable vsan vsan-id
Step 3
switch(config)# no fspf enable vsan vsan-id
OL-xxxxx-xx
Purpose
Configures the autonomous region for this VSAN and specifies the
region ID.
Purpose
Enters configuration mode.
Deletes the FSPF configuration for the specified VSAN.
Purpose
Enters configuration mode.
Enables the FSPF routing protocol in the specified VSAN.
Disables the FSPF routing protocol in the specified
VSAN.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
FSPF Global Configuration
147