Configuring and Managing Zones
Zone Sets
In the following figure, two separate sets are created, each with its own membership hierarchy and zone
members.
Figure 24: Hierarchy of Zone Sets, Zones, and Zone Members
Zones provide a method for specifying access control, while zone sets are a grouping of zones to enforce
access control in the fabric. Either zone set A or zone set B can be activated (but not together).
Zone sets are configured with the names of the member zones and the VSAN (if the zone set is in a
Tip
configured VSAN).
Activating a Zone Set
Changes to a zone set do not take effect in a full zone set until you activate it.
To activate or deactivate an existing zone set, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# zoneset activate name zoneset-name vsan vsan-id
3. switch(config)# no zoneset activate name zoneset-name vsan vsan-id
OL-xxxxx-xx
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
Zone Sets
111