Displaying Flow Statistics - Cisco nexus 5000 series Cli Configuration Manual

Default Settings
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
switch# clear fcflow stats index 1

Displaying Flow Statistics

Use the show fcflow stats commands to view flow statistics. The following example displays the
aggregated flow summary:
switch# show fcflow stats aggregated
Idx
---------- ---------- ----------
The following example displays the flow statistics:
switch# show fcflow stats
The following example displays flow index usage:
switch# show fcflow stats usage
2 flows configured
configured flow : 3,7
7
The following example shows how to display global FSPF information for a specific VSAN:
switch# show fspf vsan 1
The following example shows how to display a summary of the FSPF database for a specified VSAN. If
no additional parameters are specified, all LSRs in the database are displayed:
switch# show fspf database vsan 1
The following example shows how to display FSPF interface information:
switch# show fspf vsan 1 interface fc2/1
Default Settings
Table 1-2
Table 1-2
Parameters
FSPF
SPF computation
SPF hold time
Backbone region
Acknowledgment interval (RxmtInterval)
Refresh time (LSRefreshTime)
Maximum age (MaxAge)
Hello interval
Dead interval
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-16
VSAN frames
6 1 42871
lists the default settings for FSPF features.
Default FSPF Settings
Chapter 1 Configuring Fibre Channel Routing Services and Protocols
Default
Enabled on all E ports and TE ports.
Dynamic.
0.
0.
5 seconds.
30 minutes.
60 minutes.
20 seconds.
80 seconds.
OL-16597-01