Cisco Nexus 5000 Series Nx-Os San Switching Configuration Guide - Cisco Nexus 5000 Series Configuration Manual

Default Fibre Channel Interface Settings
Table 7: Default Native Fibre Channel Interface Parameters
Parameters
Interface mode
Interface speed
Administrative state
Trunk mode
Trunk-allowed VSANs
Interface VSAN
Beacon mode
EISL encapsulation
Data field size
The following table lists the default settings for virtual Fibre Channel interface parameters.
Table 8: Default Virtual Fibre Channel Interface Parameters
Parameters
Interface mode
Interface speed
Administrative state
Trunk mode
Trunk-allowed VSANs
Interface VSAN
EISL encapsulation
Data field size

Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide

26
Configuring Fibre Channel Interfaces
Default
Auto
Auto
Shutdown (unless changed during initial setup)
On (unless changed during initial setup)
1 to 4093
Default VSAN (1)
Off (disabled)
Disabled
2112 bytes
Default
F mode
n/a
Shutdown (unless changed during initial setup)
On
All VSANs
Default VSAN (1)
n/a
n/a
OL-xxxxx-xx