Verifying Enhanced Zone Information; Compacting The Zone Database - Cisco Nexus 5000 Series Configuration Manual

Configuring and Managing Zones
Command or Action
Step 2
switch(config)# system default zone default-zone
permit
Step 3 switch(config)# no system default zone
default-zone permit
Step 4 switch(config)# system default zone distribute
full
Step 5 switch(config)# no system default zone distribute
full

Verifying Enhanced Zone Information

The following example shows how to display the zone status for a specified VSAN:
switch# show zone status vsan 2

Compacting the Zone Database

You can delete excess zones and compact the zone database for the VSAN.
A merge failure occurs when a switch supports more than 2000 zones per VSAN but its neighbor does
Note
not. Also, zone set activation can fail if the switch has more than 2000 zones per VSAN and not all switches
in the fabric support more than 2000 zones per VSAN.
To delete zones and compact the zone database for a VSAN, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# no zone name zone-name vsan vsan-id
3. switch(config)# zone compact vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 switch# configuration terminal
OL-xxxxx-xx
Purpose
Configures permit as the default zoning policy for new VSANs
on the switch.
Configures deny (default) as the default zoning policy for new
VSANs on the switch.
Enables full zone database distribution as the default for new
VSANs on the switch.
Disables (default) full zone database distribution as the default
for new VSANs on the switch. Only the active zone database
is distributed.
Purpose
Enters configuration mode.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
Compacting the Zone Database
129