New And Changed Information; C H A P T E; Configuring Interop Mode - Cisco Nexus 5000 Series Configuration Manual

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
5000 Series NX-OS SAN Switching Configuration Guide.
•
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000
Series NX-OS SAN Switching Configuration Guide.
The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS, see the Cisco Nexus 5000 Series NX-OS Release
Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS SAN
Switching Configuration Guide, Release 5.0(2)N2(1), and tells you where they are documented.
Table 1: New and Changed SAN Switching Features for Cisco NX-OS Release 5.0(2)N2(1)
Feature
VSAN Trunking
VE Port
OL-xxxxx-xx
New and Changed Information, page 1
Description
Added information abut
configuring virtual Fibre
Channel interfaces in
trunking mode.
Added information about
configuring multi-hop
FCoE fabric using VE
ports.
C H A P T E R
Changed in Release
5.0(2)N2(1)
5.0(2)N2(1)
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
1
Where to find it
documented...
Configuring VSAN
Trunking
Configuring Fibre
Channel Interfaces
1