About Load Balancing; Configuring Load Balancing - Cisco Nexus 5000 Series Configuration Manual

Configuring and Managing VSANs
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# vsan database
Step 3 switch-config-db# vsan 2
Step 4 switch(config-vsan-db)# no vsan 5
Step 5 switch(config-vsan-db)# end

About Load Balancing

Load-balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange
OX ID (src-dst-ox-id, the default) for load-balancing path selection.

Configuring Load Balancing

To configure load balancing on an existing VSAN, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# vsan database
3. switch(config-vsan-db)# vsan vsan-id
4. switch(config-vsan-db)# vsan vsan-id loadbalancing src-dst-id
5. switch(config-vsan-db)# no vsan vsan-id loadbalancing src-dst-id
6. switch(config-vsan-db)# vsan vsan-id loadbalancing src-dst-ox-id
7. switch(config-vsan-db)# vsan vsan-id suspend
8. switch(config-vsan-db)# no vsan vsan-id suspend
9. switch(config-vsan-db)# end
DETAILED STEPS
Command or Action
Step 1 switch# configuration terminal
Step 2 switch(config)# vsan database
Step 3 switch(config-vsan-db)# vsan vsan-id
OL-xxxxx-xx
Purpose
Enters configuration mode.
Configures the VSAN database.
Places you in VSAN configuration mode.
Deletes VSAN 5 from the database and switch.
Places you in EXEC mode.
Purpose
Enters configuration mode.
Enters VSAN database configuration submode
Specifies an existing VSAN.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
Configuring VSANs
99