Creating Fc Aliases Example - Cisco Nexus 5000 Series Configuration Manual

Zone Sets
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# fcalias name AliasSample
vsan vsan-id
Step 3
switch(config-fcalias)# member type value

Creating FC Aliases Example

Table 20: Type and Value Syntax for the member Command
Device alias
Domain ID
FC ID
Fabric pWWN
Local sWWN interface
Domain ID interface
Remote sWWN interface
pWWN
The following example shows how to configure different types of member alias:
switch(config)# fcalias name AliasSample vsan 3
pWWN example:
switch(config-fcalias)# member pwwn 10:00:00:23:45:67:89:ab
fWWN example:
switch(config-fcalias)# member fwwn 10:01:10:01:10:ab:cd:ef
FC ID example:
switch(config-fcalias)# member fcid 0x222222
Domain ID example:
switch(config-fcalias)# member domain-id 2 portnumber 23
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
114
Purpose
Enters configuration mode.
Configures an alias name (AliasSample).
Configures a member for the specified fcalias (AliasSample) based
on the type (pWWN, fabric pWWN, FC ID, domain ID, or
interface) and value specified.
Multiple members can be specified on multiple
Note
lines.
member device-alias device-alias
member domain-id domain-id portnumber number
member fcid fcid
member fwwn fwwn-id
member interface type slot/port
member interface type slot/port domain-id
domain-id
member interface type slot/port swwn swwn-id
member pwwn pwwn-id
Configuring and Managing Zones
OL-xxxxx-xx