Working With The Flash File System - Cisco Catalyst 2360 Software Configuration Manual

Working with the Cisco IOS File System,
Configuration Files, and Software Images
This appendix describes how to manipulate the Catalyst 2360 switch flash file system, how to copy
configuration files, and how to archive (upload and download) software images to the switch.
For complete syntax and usage information for the commands used in this chapter, see the switch
Note
command reference for this release and the Cisco IOS Configuration Fundamentals Command
Reference, Release 12.2.
This appendix consists of these sections:
•
•
•

Working with the Flash File System

The flash file system is a single flash device on which you can store files. It also provides several
commands to help you manage software image and configuration files. The default flash file system on
the switch is named flash:.
These sections contain this configuration information:
•
•
•
•
•
•
•
•
OL-19808-01
Working with the Flash File System, page B-1
Working with Configuration Files, page B-8
Working with Software Images, page B-23
Displaying Available File Systems, page B-2
Setting the Default File System, page B-3
Displaying Information about Files on a File System, page B-3
Changing Directories and Displaying the Working Directory, page B-4
Creating and Removing Directories, page B-4
Copying Files, page B-5
Deleting Files, page B-5
Creating, Displaying, and Extracting Files, page B-6
C H A P T E R
Catalyst 2360 Switch Software Configuration Guide
B
B-1