Setting Up Usb Communications; Setting Up Serial Communications - Intermec PB51 User Manual

Chapter 2 — Con guring the PB51

Setting Up USB Communications

To set up USB communications with your PC, you will need:
You can download the InterDriver software from the Intermec web
site at

Setting Up Serial Communications

Use a serial cable (P/N 075497-001) to connect the PB51 to a PC or a
mobile computer. For the mobile computer, you may n eed to
purchase a serial adapter. For more information, co ntact your local
Intermec sales representative.
Before you can establish a serial connection, you need to make sure
that the settings on the PC or mobile computer matc h those of the
PB51.
Serial Port Settings on the PB51
Parameter
Baud rate
Data bits
Parity
Stop bits
Flow control
36
where xxxxxxxxxx can be a value from 0 to 64 characters.
Send the following command to make sure your values match
those used by the access point:
setup write "8021x","uart1:"
You may need to send the following command several times for
the wireless station to connect:
setup "wlan","ACTIVE","1"<ETX>
USB cable
Intermec InterDriver® software
www.intermec.com
Default Setting
115200
8
None
1
XON_XOFF (IPL)
RTS/CTS (ESC/P)
PB51 Mobile Label and Receipt Printer User's Guide
.