Con Guring Wireless Printing Using Ipl - Intermec PB51 User Manual

Understanding the 802.11 Radio Icons (continued)
Icon
Use the following sections to set most of your wireless
communication settings. For help with additional co mmands and
information, see either the Fingerprint Command Reference Manual
937-005-xxx) or the IPL Command Reference Manual (P/N 937-007-xxx).
You can download both documents from the Intermec web site at
www.intermec.com

Con guring Wireless Printing Using IPL

Use the following procedures to con gure your PB51 with IPL for
wireless printing.
To con gure the printer to use WEP authentication
1 Send the following commands to login as an admin an d set the
2 Send the following commands to con gure the WEP ke ys. The
3 Send the following command to activate the settings.
PB51 Mobile Label and Receipt Printer User's Guide
Description
Weak signal
Poor signal
No signal
.
SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,
where xxxxx can be from 0 to 32 ASCII characters, not includin g
the double quote.
Note: The default password for logging in as an admin is "pass." If
you have changed the password, you will need to use your
password instead of "pass."
following example sets WEP key 1 to 1234 and enables WEP key 1.
<STX><SI>ws,WEP1, 0x0001020304<ETX>
<STX><SI>ws,.WEP_KEY,1<ETX>
<STX><SI>ws,ACTIVE,1<ETX>
Chapter 2 — Con guring the PB51
<ETX>
xxxxx
(P/N
31