About Wi-Fi Communications; Connect The Printer To A Wireless Network - Intermec PC23 User Manual

About Wi-Fi Communications

PC23 and PC43 Desktop Printer User Manual
The printer supports Wi-Fi communications when the optional
Wi-Fi/Bluetooth module is installed.
You can configure Wi-Fi communications:
• from the printer web page. You need to know the printer IP
address.
• from the printer Main Menu if your printer has a graphical
interface.
By default, the printer supports DHCP networks. If you are not using
a DHCP network and you do not know the printer IP address, you need
to configure Wi-Fi settings by using Intermec PrintSet 5 through a
USB connection to the printer, or by sending commands through a
serial connection.

Connect the Printer to a Wireless Network

Before you begin, you should be familiar with the settings you need for
your network.
If you are using a DHCP network, turn the printer on. The printer
automatically connects to the wireless network.
For a printer with the LCD interface, the Wi-Fi Connection icon shows
the status of the connection.
®
Ready
Fingerprint
10.200.27.89
Chapter 3 — Connect the Printer
01/04/2012
12:00
73