Intermec PB51 User Manual page 53

Possible PB51 Error Icons and Messages
Error Icon Error Message
PB51 Mobile Label and Receipt Printer User's Guide
Chapter 3 — Troubleshooting and Maintaining the PB5 1
Pause
Paper out (IPL)
Out of Paper
(Fingerprint)
Testfeed not
done
Printhead hot
'
Upgrading
LSS too high,
LSS too low
IP con guration
error
IP link error
Description
The print job is paused.
The printer is out of paper. Load a new roll of
media. For help, see "Loading Media" on
page 11.
The printer did not perform a testfeed before
it printed out test labels. It is important to
perform a testfeed because it calibrates the
sensor.
To perform a testfeed:
In Fingerprint and ESC/P, press the Feed
button for more than 2 seconds.
In IPL, open and close the media door and
then press the Feed button.
The printhead is overheated and needs to
cool down. In IPL, wait for printing to resume
automatically. In Fingerprint and ESC/P,
your print job is lost.
The printer is loading new rmware.
These errors can occur when you run a test
feed without any media installed, or if you
have incorrect media settings.
Load the printer with media (see
Media" on page 11 ), run Test mode (see
"Using Test Mode" on page 21
the appropriate media type.
The printer is trying to acquire an IP address
from the network. Wait for the printer to
complete the task before taking any action.
No network connection.
"Loading
), and select
43