Thermal Transfer Printing Ribbon Load - Intermec EasyCoder 501 XP Installation & Operation Manual

Thermal Transfer Printing
Ribbon Load
1
Open the front and right-hand doors.
Intermec EasyCoder 501 XP – Installation & Operation Ed. 3
The EasyCoder 501 XP can print labels, tickets, tags etc. using ei-
ther direct thermal printing on special heat-sensitive paper or ther-
mal transfer printing using a special ink-coated ribbon.
The thermal transfer printing allows a wide range of reciving face
materials to be used. Make sure to select a type of transfer ribbon
that matches the type of receving face material to be used (see Ap-
pendix 2 "Media Specifications") and to set up the printer accord-
ingly (see chapter 7 "Setting Up the Printer").
Transfer ribbons do not smear at room temperature.
NOTE!
Only original transfer ribbons from Intermec must be used (see
Appendix 2), or the printhead warranty will be invalidated.
2
Turn the printhead lift knob to "Open" position.
Chapter 6
48