6
Settings
[Reference]
The registered content of [PC (FTP)]
Settings
[Host Address]
[File Path]
[User ID]
[Password]
[anonymous]
[PASV]
[Proxy]
[Port No.]
The registered content of [PC (WebDAV)]
Settings
[User ID]
[Password]
[Host Address]
[File Path]
[Proxy]
6-22
Description
On the Touch Panel, search for a computer to send a file to, and select a target
shared folder.
When the authentication screen appears, enter the name and password of a
user who has privileges to access the selected folder. After authentication,
[Host Address] or [File Path] is entered automatically.
The Reference function may fail under the following conditions.
•
If 512 or more workgroups or computers are on the network (subnet) con-
nected to this machine, this function may fail.
•
This function is not available in the IPv6 environment.
Description
Enter the host name or IP address of the destination FTP server (using up to
253 bytes).
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the name of a destination folder in the FTP server specified in [Host Ad-
dress] with up to 127 bytes.
•
Entry example: "scan"
When specifying a folder in the FTP folder, insert a symbol, "/", between the
folder names.
•
Entry example: "scan/document"
When not specifying a file path, enter only "/".
•
Entry example: "/"
If authentication is required in the destination FTP server, enter the available
user name to log in (using up to 64 characters).
Enter the password of the user specified in [User ID].
When authentication is not required in the destination FTP server, tap [ON].
[OFF] is specified by default.
When the PASV mode is used in your environment, tap [ON].
[OFF] is specified by default.
When a proxy server is used in your environment, tap [ON].
[OFF] is specified by default.
If necessary, change the port number.
In normal circumstances, you can use the original port number.
[21] is specified by default.
Description
Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 64 characters).
Enter the password of the user specified in [User ID].
Enter the host name or IP address of the destination WebDAV server (using up
to 253 bytes).
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the name of a destination folder in the WebDAV server specified in [Host
Address] (using up to 142 bytes).
•
Entry example: "scan"
When specifying a folder in the WebDAV folder, insert a symbol, "/", between
the folder names.
•
Entry example: "scan/document"
When a proxy server is used in your environment, tap [ON].
[OFF] is specified by default.
Registering a destination
bizhub C3851FS/C3851/C3351
6.6