Table of Contents
Advertisement
6.2
Using the scan function
2
Tap [Scan/Fax].
3
Specify the destination.
% You can select the desired destination from the pre-registered destination list, or directly enter des-
tination information. For details on how to register a destination, refer to page 6-20.
% Specifying multiple destinations carries out computer sending and fax transmission simultaneously.
4
Specify the size of the original to be scanned.
% The size of the original can be specified in [Scan Size] (default: [8-1/2 e 11] (inch area)/[A4] (centim-
eter area)). If you fail to set the original size correctly, the image may be cut off.
5
Configure Scan option settings as necessary.
% For details on option settings, refer to [Scan] in the User's Guide CD.
6
Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press the Reset key.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning process stops, and a list of
stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.
bizhub C3851FS/C3851/C3351
6
6-9
- Quick Links:
- Table of Contents
- Using the Scan Function
Hide quick links:
Advertisement
Table of Contents
