Konica Minolta BIZHUB C3851FS Quick Start Manual page 91

6
Function
[Separate Scan]
[Background Removal]
[Text Enhancement]
[Glossy]
[Neg-/Pos. Reverse]
[Background Color]
[Color Adjust]
[Booklet]
[Page Margin]
[Image Shift]
[Mirror Image]
[Image Repeat]
[Poster Mode]
[Image Adjust]
[Cover Sheet]
[Insert Sheet]
[Insert Image]
[Chapters]
[Date/Time]
[Page Number]
[Stamp]
[Stamp Repeat]
[Header/Footer]
[Watermark]
[Overlay]
[Registered Overlay]
[Copy Protect]
[Frame Erase]
6-16
Overview
If the number of original sheets is so large that they cannot be loaded into the
ADF at the same time, you can load them in several batches and handle them
as one job.
Adjust the density of the background area when copying originals with colored
background (newsprints, recycle paper, etc.) or originals that are so thin that
text or images on the back would be scanned.
Either of photos or text is enhanced when text is superimposed over photos
(figure, graph, etc.).
Images are copied with a glossy finish.
Copy the original with the density (gradations) and color of the image inversed.
The finished image looks like a negative print photo.
Color the blank area of the original with a specified background color.
Adjust the color quality (brightness, saturation, color balance, etc.) of the orig-
inal for copying.
The pages in the original data are arranged and spread in a booklet format and
printed on both sides of sheets.
You can add a margin for binding copied sheets. Select a paper binding posi-
tion and adjust the binding width for copying.
You can fine tune the print position of the image upward, downward, right-
ward, and leftward with respect to the paper.
Copy the original image by reversing its left and right, like a reflection image on
the mirror.
Copy an original image repeatedly copied onto the same side of a single sheet.
The original image is enlarged, divided, and printed on multiple sheets. When
you join the printed sheets, you will create a large poster.
Specify how to arrange the original image on the paper. You can enlarge a part
of the original to the maximum limits of the paper, or arrange the original image
at the center of the page without enlarging it.
You can insert a cover sheet before the first page or after the last page of the
text.
You can insert a sheet that is of a different type from other pages (such as color
and thick papers) for a specified page.
The original scanned using the Original Glass is inserted after the page you
have specified in the original scanned using the ADF.
When an original is copied onto both sides of sheets of paper, the first page of
each chapter is always printed on the front side of paper.
Add a date and time to make a copy.
Add page and chapter numbers on copied sheets.
Text such as "PLEASE REPLY" and "DO NOT COPY" are printed on the first
page or all pages.
Stamp such as "Copy" and "Private" are printed on the entire page.
Add the date, time, and any other desired text in the top and bottom margins
(header/footer) of the specified page.
Add text such as "COPY" or "Confidential" in the center of each page in a tint
color to make a copy.
The original image scanned in the first page is overlaid on the originals
scanned in the subsequent pages.
In [Register Overlay Image], register original images to the hard disk of this ma-
chine as overlay image. You can call a registered overlay image and compose
it on an original that is scanned later.
Text such as "Copy" and "Private" are printed in the background pattern as
concealed text.
Erases the four sides of the original to the same width. You can also specify
the width to be erased for each side.
Using the copy function
bizhub C3851FS/C3851/C3351
6.4