Using The Copy Function; How To Copy - Konica Minolta BIZHUB C3851FS Quick Start Manual

6
6.4

Using the copy function

6.4.1

How to copy

1
Load the original.
2
Tap [Copy].
3
Specify the size of the original to be scanned.
% The size of the original can be specified in [Original Settings] (default: [8-1/2 e 11] (inch area)/[A4]
(centimeter area)). If you fail to set the original size correctly, the image may be cut off.
4
If necessary, configure copy settings.
% The setting change is reflected on the image of [Output]. Therefore, you can configure the settings
while checking the output image.
% To reconfigure settings, press the Reset key.
% For details on copy settings, refer to page 6-15.
6-14
Using the copy function
bizhub C3851FS/C3851/C3351
6.4