Using The Ethernet Interface - Xerox DocuCentre SC2020 User Manual

Environment Settings
4. Press the power switch to the [ | ] position to turn the power ON.

Using the Ethernet Interface

The device supports 100BASE-TX and 10BASE-T Ethernet interfaces.
To connect the Ethernet interface:
1. Press the power switch to the [ ] position to turn the power OFF.
Note: Ensure that the display is turned off.
2. Connect a network cable to the Ethernet port.
Note: Prepare a network cable suitable for your network connection. When you replace the network
cable, contact our Customer Support Center.
29 ®
Xerox DocuCentre
User Guide
®
SC2020