Using the Scan Feature
You can select the scan functions from the following list.
Scan Function
Scanning to a Computer
Using a Scanner on the Network
Sending an Email With the Scanned Image
Note:
The file name of the scanned data appears in the format [YYMMDDHHMMSS.extension]. Here,
YY = Year (4 digits), MM = Month (2 digits), DD = Day (2 digits), HH = Hour (2 digits), MM = Minutes (2
digits), and SS = Seconds (2 digits).
Scanning to a Computer
This section describes how to scan document to a computer.
Scanning From the Control Panel - WSD Scan
If the device is connected to a computer via network using WSD (Web Services on Devices), you can use the
WSD Scan function to send scanned images to a computer.
The following procedure uses Windows 7 as an example.
Notes:
•
To use WSD Scan, you need to setup connection using WSD.
*
•
WSD
is supported only on Windows Vista
Printer Setup for WSD Scan
Setup the device and computer for connection using WSD.
Checking the Printer Setting
To use the WSD Scan function, [WSD Scan] needs to be set to [Enable]. For more information, refer to
Protocols
on page 162.
Setting Up the Computer
Note:
For Windows 8, the computer automatically connects the device using WSD. There is no need to
install the device manually.
For Windows 7:
1.
Click [Start] > [Computer] > [Network].
See Page
Page 128
Page 131
Page 143
®
, Windows 7, and Windows 8.
Xerox
®
®
DocuCentre
SC2020
User Guide
Scan
128