Xerox DocuCentre SC2020 User Manual page 187

Purpose:
To specify whether to automatically change the color of the print jobs requested to be printed in color into
black and white.
Values:
Off
On
Maintenance
Use the [Maintenance] menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
Note: Bold values are the factory default menu settings.
Adjust Paper Type
Purpose: To specify paper density settings.
Values:
Plain
Labels
Adjust Transfer Belt Unit
Purpose: To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the
previous page, or a part of the page currently printing.)
Values:
0
(Lighten) -5 to +5
(Darken)
Adjust 2nd BTR
Purpose: To specify the transfer roll voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print
output, try to increase the voltage. If you see white spots on the print output, try to decrease the voltage.
Note: The print quality changes depending on the setting values you select for this item.
Prints color print jobs as requested.
Prints color print jobs in black and white.
Lightweight
Heavyweight
Lightweight
Heavyweight
If faint ghosts appear, try to decrease the value.
® ®
Xerox DocuCentre SC2020
User Guide
Tools
184