System Fans; Installing Hard Drives - Supero SUPERSERVER 5018A-TN4 User Manual

S S
UPER ERVER 5018A-TN4 User's Manual
6-4

System Fans

One system fan is included in the system. Up to two additional (optional) fans may
be installed in the SC504 chassis.
Installing Optional System Fans
1. Position the dual system fan housing in the front of the chassis, facing for-
ward as illustrated above, in front of the motherboard.
2. Align the mounting holes in the fan housing with the holes in the floor of the
chassis.
3. Secure the dual fan housing to the chassis with the screws provided.
4. Position the single system fan to the left of the dual system fans.
5. Align the mounting holes in the single fan housing with the holes in the floor
of the chassis.
6. Secure the single fan housing to the floor of the chassis.
7. Connect the fan cables to the motherboard and put the cover back on the
chassis.
6-5

Installing Hard Drives

Follow the instructions that follow to install either four 2.5" or two 3.5" hard drives.
Installing 3.5" Hard Drives
1. Power down the server, disconnect the power cord from the power supply and
remove the cover.
2. Place the 3.5" hard drive into the chassis as illustrated above.
3. Secure the hard drive to the chassis floor by inserting four screws up through
the underside of the chassis.
4. Connect the hard drive wiring, reinstall the chassis cover and power cord,
then power up the server.
6-4