Security Settings - Supero SUPERSERVER 5018A-TN4 User Manual

Table of Contents

Advertisement

7-6

Security Settings

This menu allows the user to configure the following security settings for the
system.
If the Administrator password is defined ONLY - this controls access to the
BIOS setup ONLY.
If the User's password is defined ONLY - this password will need to be entered
upon each system boot, and will also have Administrator rights in the setup.
Passwords must be at least 3 and up to 20 characters long.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
User Password
Use this feature to set a User Password which is required to log into the system
and to enter the BIOS setup utility. The length of the password should be from 3
characters to 20 characters long.
Secure Boot Menu
This section displays the contents of the following secure boot features:
System Mode
Secure Boot
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and
Custom.
7-31
Chapter 7: BIOS

Advertisement

Table of Contents
loading

Table of Contents