Supero SUPERSERVER 5018A-TN4 User Manual page 92

S S
UPER ERVER 5018A-TN4 User's Manual
Maximum Read Request
Select Auto to allow the system BIOS to automatically set the maximum Read
Request size for a PCI-E device to enhance system performance. The options are
Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
ASPM Support
This feature allows the user to set the Active State Power Management (ASPM)
level for a PCI-E device. Select Force L0 to force all PCI-E links to operate at L0
state. Select Auto to allow the system BIOS to automatically set the ASPM level for
the system. Select Disabled to disable ASPM support. The options are Disabled,
Force L0, and Auto.
Warning: Enabling ASPM support may cause some PCI-E devices to fail!
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a 64-bit PCI device in the space above 4G Address. The
options are Enabled and Disabled.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy storage device. The options are Do Not Use, UEFI Only Legacy
Only, Legacy First, UEFI First.
PCIe Slot 1 OPROM
Select Enabled to enable Option ROM support to boot the computer using a net-
work interface device install in the slot specified above. The options are Enabled
and Disabled.
Launch Video OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface) and video device OPROM. Select Legacy Only to boot the system using
a legacy device installed in a video port. The options are Do Not Use, UEFI Only
Legacy Only, Legacy First, UEFI First.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Launch Network OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface) and LAN device OPROM. Select Legacy Only to boot the system using
7-20