Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 5018A-TN4.
Installation and maintainance should be performed by experienced technicians only.
The SuperServer 5018A-TN4 is a compact server based on the SC504-203B rack-
mountable chassis and the A1SAi-2750F single processor motherboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the A1SAi-2750F motherboard
and the SC504-203B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5018A-TN4
into a rack and check out the server configuration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: Standardized Warning Statements
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardzed Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 5018A-TN4.
Preface
iii
Preface
Advertisement
Table of Contents
