Control Panel Leds; Power Fail; Information Led; Nic1 - Supero SUPERSERVER 5018A-TN4 User Manual

SUPERSERVER 5018A-TN4 User's Manual
3-3

Control Panel LEDs

The control panel located on the front of the chassis has six LEDs. These LEDs
provide you with critical information related to different parts of the system. This
section explains what each LED indicates when illuminated and any corrective ac-
tion you may need to take.

Power Fail

Indicates a power supply module has failed. The second power supply module will
take the load and keep the system running but the failed module will need to be
replaced. Refer to Chapter 6 for details on replacing the power supply. This LED
should be off when the system is operating normally.

Information LED

Thw Information LED doubles as a unit indicator and as warning LED. See the
table below for details.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue (300 m/s)
1

NIC1

Indicates network activity on the LAN1 port when flashing.
Information LED
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate
the server in a rack mount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
3-2
Description