10-Gigabit Ethernet 10Gbase Optical Interface Specifications; 10Gbase-Lrm Specifications; Table 19: 10Gbase-Lrm Optical Interface Specifications - Juniper T320 Manual

T320 Core Router Interface Module Reference

10-Gigabit Ethernet 10GBASE Optical Interface Specifications

10GBASE-LRM Specifications

34
Supported Network Interface Standards by Transceiver for PTX Series Routers
The 10-Gigabit Ethernet optical interface standards are supported on M120 routers, M320
routers, MX Series routers, T Series routers, and PTX Series routers.
To determine which transceivers support each 10GBASE standard, see
Network Interface Standards by Transceiver for ACX, M, MX, and T Series Routers" on
page 19 and Supported Network Interface Standards by Transceiver for PTX Series Routers.
The "Cables and Connectors" section in the description for each MIC or PIC lists which
standards and transceivers are supported for that device.
NOTE: Some XFP transceivers can support either the 10-Gigabit Ethernet or
SONET/SDH OC192/STM64 specifications. Check the standard supported
for the device in which the transceiver is installed. For example, the
XFP-10G-E-OC192-IR2 transceiver installed in a 10-Gigabit Ethernet PIC
supports the 10GBASE-E standard. However, the XFP-10G-E-OC192-IR2
transceiver installed in a SONET/SDH OC192/STM64 PIC supports the
SONET/SDH OC192/STM64 IR2 standard.
The specifications are organized by distance supported.
10GBASE-LRM Specifications on page 34
10GBASE-S Specifications on page 35
10GBASE-L Specifications on page 36
10GBASE-E Specifications on page 36
10GBASE-Z Specifications on page 37
Table 19 on page 34 shows the optical interface specifications for the 10GBASE-LRM
standard.

Table 19: 10GBASE-LRM Optical Interface Specifications

Parameter
Optical interface
Standard
Maximum distance
Transmitter wavelength
10GBASE-LRM
Multimode
IEEE 802.3aq-2006
62.5/125 MMF cable, 500 MHz-km: 722 ft (220 m)
50/125 MMF cable, 500 MHz-km: 722 ft (220 m)
1260 through 1355 nm
Copyright © 2015, Juniper Networks, Inc.
"Supported