10Gbase-Z Specifications - Juniper T320 Manual

10GBASE-Z Specifications

Copyright © 2015, Juniper Networks, Inc.
Table 22: 10GBASE-E (10GBASE-ER and 10GBASE-EW) Optical Interface
Specifications (continued)
Parameter
Average launch power
Average receive power
Receiver saturation
Receiver sensitivity
Table 23 on page 37 shows the optical interface specifications for the 10GBASE-ZR and
10GBASE-ZW transceiver.
Table 23: 10GBASE-Z (10GBASE-ZR and 10GBASE-ZW) Optical Interface
Specifications
Parameter
Optical interface
Standard
Maximum distance
Transmitter wavelength
Average launch power
Chapter 2: Network Interface Specifications
10GBASE-E
–4.7 through 4.0 dBm
–15.8 through –1.0 dBm
–1.0 dBm
–15.8 dBm
10GBASE-Z
Single-mode
Multivendor
9/125 SMF cable: 49.6 miles (80 km)
1530 through 1565 nm
1528.38 through 1568.77 nm (tunable) for
XFP-10G-CBAND-T50-ZR
1528.38 through 1568.77 nm (tunable) for
SFPP-10G-CT50-ZR
1528.38 through 1568.77 nm (tunable) for
SFPP-10G-DT-ZRC2
0 through 4.0 dBm for XENPAK-1XGE-ZR
0 through 4.0 dBm for XFP-10G-CBAND-T50-ZR
0 through 4.0 dBm for XFP-10G-Z-OC192-LR2
0 through 5.0 dBm for SFPP-10GE-ZR
–1.0 through +3.0 dBm for SFPP-10G-CT50-ZR
–1.0 through +3.0 dBm for SFPP-10G-DT-ZRC2
0 through 4 dBM for SFPP-10G-ZR-OTN-XT
37