10Gbase-S Specifications; Table 20: 10Gbase-S (10Gbase-Sr And 10Gbase-Sw) Optical Interface - Juniper T320 Manual

10GBASE-S Specifications

Copyright © 2015, Juniper Networks, Inc.
Table 19: 10GBASE-LRM Optical Interface Specifications (continued)
Parameter
Average launch power
Average receive power
Receiver saturation
Receiver sensitivity
Table 20 on page 35 shows the optical interface specifications for the 10GBASE-SR and
10GBASE-SW standards.
NOTE: The XFP-10G-L-OC192-SR1 transceiver supports single-mode fiber
and the 10GBASE-L optical interface specifications.

Table 20: 10GBASE-S (10GBASE-SR and 10GBASE-SW) Optical Interface

Specifications
Parameter
Optical interface
Standard
Maximum distance
Transmitter wavelength
Average launch power
Average receive power
Receiver saturation
Receiver sensitivity
Chapter 2: Network Interface Specifications
10GBASE-LRM
–6.5 through +0.5 dBm
–6.5 through +1.5 dBm
+1.5 dBm
–6.5 dBm
10GBASE-S
Multimode
IEEE 802.3ae—2002
50/125 MMF cable, 2000 MHz-km: 948 ft (300 m)
50/125 MMF cable. 500 MHz-km: 269 ft (82 m)
50/125 MMF cable, 400 MHz-km: 217 ft (66 m)
62.5/125 MMF cable, 200 MHz-km: 108 ft (33 m)
62.5/125 MMF cable, 160 MHz-km: 85 ft (26 m)
840 through 860 nm
–4.5 through –1.0 dBm
–9.9 through –1.0 dBm
–1.0 dBm
–9.9 dBm
35