Juniper T320 Manual page 103

Copyright © 2015, Juniper Networks, Inc.
Virtual container—alarm indication signal (VAIS)
Virtual container—loss of pointer (VLOP)
Virtual container—mismatch (VMIS)
Virtual container—remote defect indication (VRD1)
Virtual container—unequipped (VUNEQ)
SDH alarms:
Administrative unit alarm indication signal (AU-AIS)
Bit error rate—signal degrade (BERR-SD)
Bit error rate—signal fail (BERR-SF)
Bit interleaved parity (BIP) error B1, B2, B3
Higher order path—alarm indication signal (HP-AIS)
Higher order path—far-end receive failure (HP-FERF)
Higher order path—payload label mismatch (HP-PLM)
Higher order path—loss of pointer (HP-LOP)
Higher order path—remote defect indication (HP-RDI)
Higher order path—unequipped (HP-UNEQ)
Loss of frame (LOF)
Loss of light (LOL)
Loss of signal (LOS)
Multiplex section—alarm indication signal (MS-AIS)
Multiplex section—far-end receive failure (MS-FERF)
Multiplex section—remote defect indication (MS-RDI)
Multiplex section—remote error indication (MS-REI)
Phase lock loop (PLL)
Remote error indication (REI)
Severely errored frame (SEF)
Tributary unit—alarm indication signal (TU-AIS)
Tributary unit—loss of pointer (TU-LOP)
Tributary unit—mismatch (TU-MIS)
Tributary unit—remote defect indication (TU-RD1)
Tributary unit—unequipped (TU-UNEQ)
DS1 alarms:
Alarm indication signal (AIS)
Loss of frame (LOF)
Remote alarm indication signal (RAIS)
DS1 error detection:
Bursty errored seconds (BES)
CRC errors
Errored seconds (ES)
Line errored seconds (LES)
Loss of framing seconds (LOFS)
Severely errored seconds (SES)
Severely errored framing seconds (SEFS)
Unavailable seconds (UAS)
Chapter 5: Channelized Enhanced IQ (IQE) PIC Descriptions
87